FISHING TERMINAL TACKLE          

Opti-Snubbers  

         
              # 790                    # 792 (2 pack)

     
            # 793                         # 795 (2 pack) 

               Made in the USA!  

 - UV Resistant against yellowing and cracking

- 12" (overall length)  Except # 791 which is an 18" Clear Snubber
- Clear or Black both for low visibility

- # 4 Ball Bearing Swivel - prevents line twisting
- Heavy Duty Coastlock Snap/Swivel

- Very strong (Approx. 30 lbs.)

Snubbers are excellent for use when fishing Dipseys or 1LB. weights when
using wire line or superlines. The snubber provides stretch when the
fish runs with the bait, helping prevent the hook from pulling out.

# 790   12" CLEAR SNUBBER, BB Swivel 1/ea. 

# 791   18" CLEAR SNUBBER, BB Swivel 1/ea. 

# 792   12" CLEAR SNUBBER, BB Swivel 2/ea. 
# 793   12" BLACK SNUBBER, BB Swivel 1/ea. 

# 795   12" BLACK SNUBBER, BB Swivel 2/ea. 

Also available now is the "FISHERMENS SERIES" Clear Opti-Snubbers.
Same great UV Resistant material, except made with a Crane Swivel in lieu of a Ball Bearing Swivel.
 # 798   12" CLEAR SNUBBER, Crane Swivel 1/ea.
 # 799   12" CLEAR SNUBBER, Crane Swivel 2/ea. 
(PICTURES COMING SOON)

Opti - "Net Clip"                    Tattle-Tale Release

               
                  # 189                                                        # 187

Works great to hold the net bag                    The snubber provides an excellent "read"              
out of the way while neeting a fish.                on the rod tip when a fish is on. Also the
clip releases the net from the weight             extra length makes it easier to use when
of the fish, when netted.                                grabbing the release. Snubber is attached
                                                                      to a stainless steel welded ring. The Gator 
                                                                      pinchpad release is a "Heavy" spring tension. 
                                                                      Yet placing theline closer to the line near the 
                                                                      nose of the pinchpad allows a softer tension. 
                                                                      Release by: Gator Release.                     

             OPTI-NET CLIP                       "TATTLE-TALE RELEASE"                                                                                                     

Corkscrew Swivels with or without Snaps

 Made in the USA!

Uses include:
1.   Replacing snaps on bait end of Flashers or Dodgers that don't have a corkscrew. 
Makes changing fly leaders/colrs very easy by simply twisting the mono loop of the
fly leader onto the corkscrew, no tieing required to change fly or squid colors.
     

2. # 801& 802 easily attached by using a split ring (split ring not provided) or a snap.
     # 805 and 806 is equipped with a Duo-Lok snap for easy attachment.

     The corkscrew allows ease of changing baits.

3..  Another use is on the rear terminal of In-Line Boards (Yellowbirds, etc.)
holds line even in heavy waves.

(Model #'s are from left to right in the picture above)

          # 801  2/0 -14E  Corkscrew Swivel, Nickel -  Approx. 110 LB.  Qty 3/ea.

  # 802 1/0-16E  Corkscrew Swivel, Nickel -  Approx. 80 LB. Qty 3/ea.
         
  # 806, 1-16E-55  Corkscrew Swivel with Duo-Lok Snap, Nickel 
Approx. 80 LB.  Qty 3/ea.

  # 805,  2/0-14E-56  Corkscrew Swivel with Duo-Lok Snap, Nickel
Approx. 110 LB. Qty 3/ea.   

Ball Bearing Swivels with Double-Lok Snaps

1.  High Quality Stainless Steel Ball Bearings
2. Ball Bearing swivels are great for preventing line twisting

3.  Secure Strong Stainless Steel Double-Lok Snaps

4.  Welded Stainless Steel Rings for superior strength

5.  Color - Nickel Plated or Black

Model #'s are from left to right in the picture above

(Sizes: 1x1, 2x2, 3x3, 4x6, 6x9)

 3 PACK

    1 x 1 Ball Bearing Swivel/Double-Lok Snap, approx. 30 LB., 3/ea. 
  # 818 Nickel -  # 838 Black  

   2 x 2 Ball Bearing Swivel/Double-Lok Snap, approx. 50 LB., 3/ea.
   # 819 Nickel  -  # 839 Black

12 PACK

 Note: 1 x 1 and 2 x 2 are a good size for Coho, Walleye and Bass Fishing
2 x 2 are commonly used by Salmon fishermen when fishing spoons also.

 3 PACK

    3 x 3 Ball Bearing Swivel/Double-Lok Snap, approx. 75 LB., 3/ea.   
 # 820 Nickel   -  # 830 Black 

  4 x 6 Ball Bearing Swivel/Double-Lok Snap, approx. 120 LB., 3/ea.   
# 821 Nickel  -  # 831 Black 

   6 x 9 Ball Bearing Swivel/Double-Lok Snap, approx. 200 LB., 3/ea.    
# 827 Nickel   -  # 837 Black

 12 PACK

    3 x 3 Ball Bearing Swivel/Double-Lok Snap, approx. 75 LB., 12/ea.  
 # 844 Nickel  -  # 854 Black 

  4 x 6 Ball Bearing Swivel/Double-Lok Snap, approx. 120 LB., 12/ea.   
# 845 Nickel   # 855 Black

   6 x 9 Ball Bearing Swivel/Double-Lok Snap, approx. 200 LB., 12/ea.    
# 846 Nickel  -  # 856 Black

 Note: 3 x 3 and 4 x 6 are a good size for Salmon/Trout Fishing. 
Note: 4 x 6 and 6 x 9 are a good size for Muskie/Pike Fishing

 Ball Bearing Swivels with Welded Rings

 1.  High Quality Stainless Steel Ball Bearings
2. Ball Bearing swivels are great for preventing line twisting

3.  Welded Stainless Steel Rings for superior strength

4.  Color - Nickel Plated or Black

Model #'s are from left to right in the picture above
(Sizes: 2, 4, 6)

 
# 2 Ball Bearing Swivel with 2 welded rings, approx. 50 LB.    
3 Pack  -   # 861 Nickel   -  # 871 Black 

12 Pack -  # 895 Nickel   -  # 890 Black 

     Note: Size #2 are a good sizes for Coho, Walleye and Bass Fishing.  

  # 4 Ball Bearing Swivel with 2 welded rings, approx. 120 LB.  
3 Pack - # 862 Nickel  -  # 872 Black  
12 Pack -   # 897 Nickel  -  # 892 Black 

# 6 Ball Bearing Swivel with 2 welded rings, approx. 200 LB.
3 Pack - # 880 Nickel  -  # 878 Black  
12 Pack -   # 899 Nickel  -  # 893 Black 

   
# 6 Ball Bearing Swivel with 1 welded ring, approx. 200 LB.
 # 869 Nickel, Qty. 1  (bulk packs only)

 Note: Sizes # 4 and # 6 are a good sizes for Salmon/Trout and Muskie/Pike Fishing.

 Stainless Steel Coastlock Snaps
Made in the USA!

Uses include:
1. Great for tieing directly to your line to connect to the ball bearing of the Opti-Dodger,
easily change dodger colors without retying, yet the plain snap allows maximum
movement of the Opti-Dodger. Typically Sizes 33 and 34 are used.

2. Great for using in front of Crankbaits or Jerk Baits.

#34 and #35 are a good size for Muskie/Pike Fishing.
   

 Stainless Steel Duo-Lok Snaps
Made in the USA!

 1.  Double Locking mechanism is great for adding a snap to welded ring.
2. Great for using in front of Crankbaits or Jerk Baits and on Corkscrews to attach to existing Flashers.

 # 639 - Stainless Steel Duo-Lock Snaps, Blk, Sz 54, 50 LB.,   Quantity 12/ea.   

  # 640 - Stainless Steel Duo-Lock Snaps, Blk, Sz 55, 80 LB.,   Quantity 12/ea.